Thicker Glass LED Pool Lamp , Swimming Pool IP68 Waterproof Lamp

Thicker Glass LED Pool Lamp , Swimming Pool IP68 Waterproof Lamp

Description:

1. Sole & Patented design,good perfomace and beautiful outlook

2. Size: 178(diameter) * 106(height) mm

3. plastic cup which ensure lamp cup/body unbreakable & good heat difussion, and make sure of less lumens decline.

4. Transparent PC cover & EPDM rubber rigng-sealed, anti-corrosion, shock-proof, unbreakable, safe transportation

5. IP68 with lamp housing

6. Constant-current driver to make sure LED light working stably, avoid any flashing an noisy

7. Voltage: 12V AC/DC Frequency: 50/60HZ,

8. 12W, 18W, 27W, 36W, 54W, 81W

9. Projection distance: 6 ~ 15 meters

10. Color: White(pure white, warm white or cool white), Green, Blue, Color changing

11. Color temperature(white): Pure white 6000-7000K / Warm white 3000-3500K

12. Beam angle: 15 / 30 / 45 / 60 / 120°

13. Life: 50000 hours

14. Overcurrent protection

Applications: Swimming pool,park,water fall, fountain spring,garden, rockwork, yard, etc.

Advantages:

1, Our led swimming pool light has certificates: CE, IP68 waterproof rate for swimming pool.
2, No mercury and lead pollution, no UV and IR Radiation.
3, Low heat, low degradation, 3%~5%(3000hours), life span:50000Hours
4, Energy Saving, Environment Friendly.
5, Easy installation, maintenance free of our LED swimming pool light

6, Replace PAR56 300W traditional halogen light.

Instructions of remote control

1) Continue pressing the button “A” to make the 3 group led change in seven stages:Red→green→blue→red+green→red+blue→green+blue→RGB

2) Continu pressing the button “B” to make the 3 group led change in 3 modes:

1.RGB gradient change

2.Disco mode

3.Blinking change

3) Pressing button “C” to adjust the speed of “A” and “B”

4) Pressing button “D” to switch on/off the led light

5) It will reset in 5 seconds after power off

6) The remote control can operate many led lights synchronously

Installation procedure

1.Screw the bracket into the wall

2.Mount the clip of the bracket into the hole of the light

3.Screw the detailed illustrations in the below pictures