Guangzhou Yicheng Fountains & Pools Equipment Co., Ltd.
Guangzhou Yicheng Fountains & Pools Equipment Co., Ltd. With CE and ISO certified and talented R&D team, we are in a position to offer not only novel fountain design, but also reliable quality
Add to Cart
Dia 178mm Waterproof PAR56 LED Lamp , Glass Cover 18W - 40W Swimming Pool Lights WIth Controller
Description:
1,High brightness, engergy saving, enviornment protection and long lifespan LED
2,Adopt imported high brightness and High power LEDs, build-in constant current waterproof driver to ensure the lamp stable performance.
3,304 Stainless steel housing , and makes elegant appearance.
4,Use toughened glass with silicone rubber sealant and Internal with the epoxy resin sealant to ensure explosionproof, waterproof and dustproof.
5,Beam angle:10°,15°,30°,45°,60°,90°,120°
6,Colors: RGB, RED, BLUE, GREEN, WHITE, Warm white.
7,Can be connected RGB 7 colour controller or DMX control system
Color Rendering Index(CRI): Ra>80
Color Temperature(Color Temperture):
Cool white: 5000-6500K
Pure white: 4000-5000K
Warm white: 2700-3500K
Beam Angle:Horizontal Axis: 10° ,15°, 30°, 45°, 60°, 90°
Advantages:
1, Our led swimming pool light has certificates: CE, IP68 waterproof rate for swimming pool.
2, No mercury and lead pollution, no UV and IR Radiation.
3, Low heat, low degradation, 3%~5%(3000hours), life span:50000Hours
4, Energy Saving, Environment Friendly.
5, Easy installation, maintenance free of our LED swimming pool light
6, Replace PAR56 300W traditional halogen light.
Instructions of remote control
1) Continue pressing the button “A” to make the 3 group led change in seven stages:Red→green→blue→red+green→red+blue→green+blue→RGB
2) Continu pressing the button “B” to make the 3 group led change in 3 modes:
1.RGB gradient change
2.Disco mode
3.Blinking change
3) Pressing button “C” to adjust the speed of “A” and “B”
4) Pressing button “D” to switch on/off the led light
5) It will reset in 5 seconds after power off
6) The remote control can operate many led lights synchronously
Installation procedure
1.Screw the bracket into the wall
2.Mount the clip of the bracket into the hole of the light
3.Screw the detailed illustrations in the below pictures
| PAR56-LED252C | 12V/252 18W RGB led light, glass cover |
| PAR56-LED252W | 12V/252 18W single color led light, glass cover |
| PAR56-LED350C | 12V/350 25W RGB led light, glass cover |
| PAR56-LED350W | 12V/350 25W single color led light, glass cover |
| PAR56-LED558C | 12V/558 40W RGB led light, glass cover |
| PAR56-LED558W | 12V/558 40W RGB led light, glass cover |
